The BitX20A Case Kit

Pictured above is the new case kit that I am now offering for the Hendricks BitX20A kit. Now, you can install your BitX20A into a commercial quality, custom case that is powder coated Royal Blue and Antique White. The case is prepunched. No drilling, no filing, a drop in fit! All parts needed to install your BitX20A are included. The bail is included in the kit. You get the following:

• 1 - Chassis top and bottom
• 2 - small Norcal knobs
• 1 - large Norcal knob
• 1 - 22pF disk capacitor
• 1 - 1/8" stereo audio jack w/mounting ring
• 2 - 10k audio taper pot w/switch
• 1 - speaker
• 2 - speaker mounting brackets
• 2 - 4-40 x 3/8" SS flat head screws (speaker)
• 1 - red acetate plastic window
• 1 - BNC panel mounted female
• 1 - 4" bail wire kit (bail wire, 2 blocks, 2ea. 4-40 x 1/4" pan head SS screws)
• 8 - 4-40 x 1/4", SS pan head screws (4- for main pc board), (4- for dd board)
• 8 - 4-40 x 1/4" SS flat head screws (for chassis halves)
• 4 - 1/4" high self adhesive rubber feet
• 5' - 22 awg hook up wire
• 1 - BitX20A decal kit

The cost of the case is $50, and includes all parts listed above. You will need to also purchase a KD1JV digital dial kit to complete your case. If you order the case + digital dial kit, the cost is $80. If you order the complete rig, case and digital dial, the cost is $165.

Supporting Files and Documents

Bitx20 Case Kit Assembly Manual 

Ordering Information

You may use our Order page to order the BitX20 Case Kit by mail using check or money order. or

Ordering electronically by PayPal using the buttons below.