Bare Case #1

Hendricks QRP Kits
Affordable QRP kits at exceptional value

George Dobbs was a speaker at Pacificon this year and passed around a project in a neat little case that I absolutely was astounded as to the quality. I asked George where he got it and he said that he picked it up from a supplier from Wales who was no longer in business. George let me borrow the case, and I took it to the guy who built the BLT Cases for us. He was able to reproduce the case and the picture above show the result. It is made from .050 Aluminum, and is 2.375" wide x 1.30" high x 3.10" deep outside measurements. Inside measurements are: 2.15" wide x 1.20" high x 2.90" deep. The case is shipped with 2 screws as shown. Construction details are shown in the photos below. There is no play on the panels, they are firm. This is because of the tight tolerances in the corner bends as shown in the last photo.

End Panel View	Inside View
Inside View from the side	Tight corners support front and rear panels

Ordering Information

You may use our Order page to order the Bare Case #1 by mail using check or money order. or

Ordering electronically by PayPal using the buttons below.

NOTE
When an order is placed through PayPal, shipping charges are automatically calculated then a confirmation email is immediately sent by PayPal. We also receive this same email, so please rest assured that we have logged your order into our books. No other order confirmation will be issued. Your kit will be shipped in 1-2 weeks after our receiving the order, unless otherwise stated. Thanks for your support.)

Please use our Order page to order by mail.